How to Choose and Install a Motorcycle Battery #MotorRider

How to Choose and Install a Motorcycle Battery #MotorRider

Although a motorcycle battery and other types of vehicle batteries are built for longevity, over time batteries will slow down and eventually wear out. This occurs when the sulfate that flows over the plates begins to build up a residue on the plates, slowly diminishing the conductivity. In this article you'll find useful information for choosing, installing, and maintaining your next motorcycle battery.

Choosing the correct size:

In order to choose the right size motorcycle battery, you'll need to know the cold cranking amps (CCA) of your bike. Technically speaking, CCA is the number of amps a lead-acid battery at 0ºF can deliver for 30 seconds and maintain at least 1.2 volts per cell. Once you determine the required CCA, you'll need to measure the length, width, and height of the cavity to ensure a correct fit.

Removal and installation basics:

When the time comes to replace your motorcycle battery, never remove the battery while the engine is running. If for reason it does not have a charge, always remove the negative cable before the positive. When installing the new battery, reverse the order and connect the positive cable first before connecting the negative. Take extra caution to identify the positive and negative terminals before attaching the cables. Accidentally reversing the polarity can cause the battery to explode or inflict a great deal of damage to your bike's electrical system.

Recharging:

If the battery won't start or seems dull, you may only need to recharge it. Always check the voltage of your motorcycle battery before recharging and never charge your battery at an amperage more than 1/6 the rated capacity of your battery. For example, it you have a 7 amp-hour battery, you should not charge it at an amperage of more than 1 amps. If you have an 18 amp-hour battery, you can charge it at a maximum of 3 amps. Therefore, most battery tenders offer charging amperage of from 1/2 amp up to 2 amps. NOTE: NEVER USE AN AUTOMOBILE BATTERY CHARGER ON YOUR POWERSPORT SEALED BATTERY. Although recharging seems like a simple process, as a general rule of thumb always wear protective eye wear and refrain from smoking as you are working with explosive gasses.


You'll also want to ensure that there is no electrolyte covering the plates before adding water or recharging. Once you add the water, make sure that the vent caps are reinstalled before charging. Never recharge a motorcycle battery or any type of vehicle battery with the vent caps open. When you've finished charging, turn off the charger before removing the charger cables from the motorcycle battery.

Activating your new battery:

If you recently purchased a conventional battery, you may need to activate your motorcycle battery. Activating a non-sealed battery is the process of adding acid and charging the battery to the point of optimum functionality. To do this, remove the sealing tube and filling plugs, fill the battery with electrolyte, let the battery stand for about 30 minutes, then charge the battery for 3 to 5 hours at approximately 1/6 of the rated capacity. Sealed motorcycle batteries require much less maintenance and never require additional electrolyte.

If you find yourself needing to recharge your battery on a consistent basis, it's probably time to replace it to avoid getting stuck when you're ready to ride. To ensure that your new battery has a long life, it's imperative to find the right size for your bike and not to overcharge. Using a battery that is too large for your bike or overcharging the battery are the two most common causes reducing a battery's lifespan. Spending a little time choosing the right battery now means enjoying years of enjoyable, stress-free motorcycle rides in the future..

Source: Christine Harrell is a writer for Ebatteries who specialize in motorcycle batteries and more.

Posted by Fernando Lachica on 7:46 PM in hobby, maintenance, motorcycle, Motorcycle Battery

Understanding The Basic Mechanics Behind Your Helmets #MotorRider

Visit: Article Base and 53MOTO.co.uk

Understanding the basic mechanics behind your helmets

Motorcycle helmets, like the clothing, are a functional add-on for you. Motorcycling is a joyful activity, but only if you have given yourself complete (head to toe) protection. Head is the most sensitive part of human body. In the eventuality of road accidents, it is the head which is susceptible to gruesome injuries that are irreparable, most of times. Therefore, under all situations and circumstances, motorcycle helmet can make huge difference in your safety. Helmet is a protective gear and the level of the protection it offers to motorcycle rider depends on mechanics and material used in construction. It is quite significant to note here that not all helmets are designed with all that seriousness. Branded motorcycle helmets have the reason to excel as these have good balance of mechanics and material in place.

The sleekness in design couples perfectly well with light weight polycarbonate and thermoplastic composites. The visor designs of helmets are class apart. The fronts are anti-fog and anti-scratch, and moreover, provide a wide visual clearance to the motorcycle rider.

By every means, a helmet is a thin line between your life and style. If this thin line is missing, you are bound to become scapegoat in a fatal road accident. Opting for a branded helmet is the first line of defense. It will protect your head in those conditions of fatal falls. We all know about it, but out of our sheer ignorance do not like to wear it.

Helmets designed for city and racing motorcycles use the fiberglass. Next, heavy and washable reinforced padding is provided in the interiors. It is this reinforced stuff that has the power to absorb even the most deadly jerks in event of a road fall. The design mechanics used in motorcycle helmets will cut down the flow of wind and help the biker to maintain the balance. Helmet also plays significant role in protecting the biker from flies and bugs and deflect them. Statistics show that flies and bugs have been one of the many reasons behind motorcycle accidents. Wearing motorcycle helmet will keep you safe from all these minor, yet important factors.

Now coming to the final declaration! How to make the choice of branded motorcycle helmet? The best way to do it is shopping and comparison at the online store. In this way, you'll also get fabulous options to get around with. Show your promptness to make the choice now, before it is too late.

Posted by Fernando Lachica on 10:08 PM in accident, driver, helmets, jacket, motorcycle, racer, rider, security

Laser Scanning and Its Effect on the Motorcycle Industry #MotorRider

Andrew Lee. Article Base. Dan Sever presently resides in South Carolina and among different things, posts interests concerning technology and latest current events.

Laser Scanning and Its Effect on the Motorcycle Industry

The castings for the vintage laborious to seek out autos and vintage Harley Davidson motorcycles would ne'er are replicated if it absolutely was not for reverse engineering technology. This breakthrough makes use of optical device scanning of difficult 3D things, permitting the engineers to construct the plans or blueprints of the many life-saving devices, luxury vehicles, airplanes and different machinery.

The castings for the vintage laborious to seek out autos and vintage Harley Davidson motorcycles would ne'er are replicated if it absolutely was not for reverse engineering technology. This breakthrough makes use of optical device scanning of difficult 3D things, permitting the engineers to construct the plans or blueprints of the many life-saving devices, luxury vehicles, airplanes and different machinery.

Reverse Engineering integrates the Micro=Scribe with the Kreon Skiron optical device scanning machines through proprietary reverse engineering technology to accommodate the industries within the region, defense and different sectors.

Thanks to Reverse Engineering, the code for this technology is instantly out there to everybody WHO must construct or improve on existing objects that now not have the initial blueprints or which may be best improved via 3D optical device imaging Royal Enfield Accessories UK.

If you're hooked on vintage autos or motorcycles, then you'd have understood a short while back however troublesome and expensive it's to shop for moldings of their elements, particularly once the initial plans are gone or are destroyed. Producers wont to contemplate this a nightmare particularly after they required to come back up with AN higher version of those specific cars. OEM Castings ar sometimes created out there just for repairs or for a couple of vehicles. What happens once the castings or OEM elements are not any longer existing?

The auto-racing business is one in every people who are in itself features a special demand for optical device imaging with reverse engineering. Sport may be a fabulously dangerous occupation, and though the drivers are live-wires and push their limits, they'd not be automotive-less to race down the track at {180|one hundred eighty|a hundred and eighty} miles per hour while not an easy mind that the suspension elements in his or her car would work.

Reverse engineering ensures that the moldings for cars are accurately replicated. It'd commonly price plenty of cash to accomplish that, however because of reverse engineering it's currently viable to copy very precise moldings in an exceedingly cost-efficient manner.

Most older cars are restricted production which conjointly goes for the technical references. With reverse engineering, makers will recreate the elements and each nook and cranny of the cars with minimal effort, whereas keeping faithful the initial pure mathematics Royal Enfield Brass Accessories In UK.

Not long past, makers were irritated after they visited all the skilled foundries solely to examine that they didn't have what was required to breed the casts. Seemingly, the flexibility levels of the initial craftsmen were manner on the far side what the present generation might match. With the MicroScribe 3D optical device scanning, producers will currently recreate a 3D digital duplicate of the vehicles and build a information that may aid them in up gift technology.

The best aspect concerning MicroScribe's reverse engineering machinery is that they're able to exactly manufacture 3D digital models of nearly all things, in spite of the scale. and people things will effortlessly be finished in an exceedingly matter of minutes! The tangible world has nearly become conquerable because of reverse engineering technology.

Imagine however makers will enhance current technology for race cars and you may notice that this speed glorious to humanity could be history in an exceedingly short time. With reverse engineering, it's quite straightforward to be astonished with the numerous possibilities and potentialities that the planet will accomplish these days not solely within the field of sport and automotive production however conjointly in science, engineering and also the arts.

Posted by Fernando Lachica on 9:59 PM in bikes, driving, Laser Scanning, Motor Industry, motorcycle, motors, racers, technology

How to Choose the Best Motorcycle Gear #MotorRider

Article Base




Riding through valleys, highways, or the countryside on your motorcycle is quite a riveting experience, but just because you are riding young, wild, and free doesn't mean that you should not wear proper motorcycle gear. Wearing proper motorcycle gear protects you from accidents, dirt, and dust. Wearing shirts, shorts, and rubber shoes is not enough to protect you from an unpredictable accident. You will need the right kind of gear that can withstand friction whenever an unpredictable accident occurs.

How to Choose the Best Motorcycle Gear

Motorcycle rides are adrenaline filled and can tempt anyone to push beyond their limits. Wearing the right gear such as helmets, jackets, riding suits, and gloves can protect you from severe injury whenever you ride your motorcycle.


Now that you know what to wear, choosing the right gear is your top priority. The first thing that you should always wear whenever you ride your motorcycle is the helmet. The helmet protects your head from severe injury if ever you get involved in an accident. A slight bump to your head whenever you ride your motorcycle can lead to amnesia, hemorrhage, or worse, death. You will increase the chances of getting injured when you ride your motorcycle without a helmet on. Choose a helmet that can withstand shock and does not break easily. Make sure that the helmet you choose fits perfectly onto your head. A helmet that is too tight or too loose is just as bad as not wearing one.

The next gear you should look for is a leather jacket. You may think that a leather jacket is just for show, but it has a practical purpose for bike riders. A leather jacket protects you from gashes and serious injuries when you are thrown out of your bike in an accident. A leather jacket protects you from friction when you hit the pavement, if you fall off your bike.

Gloves are an important piece of motorcycle gear. Gloves protect your hands from getting blisters. Wearing boots protect the soles of your feet from injury and provides them with sturdy footwear for the grind of riding a motorcycle for hours. Check the fit of the gloves and boots you want to purchase, and read customer feedback before you make a purchase. Riding suits and pants also add protection if ever you fall off your motorcycle, and helps you keep warm when the weather is cold wherever you are going.

Riding a motorcycle is not all about style, coolness, and being as free as you want to be, you should also be cautious by wearing the right gear whenever you ride your motorcycle.

Posted by Fernando Lachica on 4:00 PM in gears, gloves, helmet, jacket, motorcycle, riders, shirt